Click here to buy PEEK.PEEK is one of the newer generation, high performance engineering plastics that does provide excellent results. Although PEEK is known for its high temperature performance, it is also for many other attributes such as good wear resistance and mechanical toughness. PEEK is becoming more popular within the engineering plastic world as it becomes more widely known and is now being specified by many of the high end industries. PEEK has an amazing fire rating of V-0 which is the highest available and in conjunction with that, PEEK also has very low smoke or toxic gass emisions if it does come into contact with any fire source. This is particularly useful in underground or simular applications. PEEK is also very good with regular contact with high pressure steam or hot water which is very good with modern high pressure sterilization processes. PEEK is also FDA approved which is very good for any food contact environments. Another area where PEEK can provide advantages is its radiation resistance, this includes X-ray, microwave and gamma ray which helps its diversity both within the pharmaceutical and nuclear industry. Operating temperatures for PEEK are upwards of 250°C and even as high as this temperature, PEEK loses very little of its properties.

PEEK Rod
PEEK Rod is available in diameters from 6mm up to 180mm diameter. These diameters are produced in maximum lengths of 3000mm but are available in a range of shorter lengths. PEEK Rod is extruded through dies and there is a small oversize manufacturing tolerance. PEEK Rod is often used within high quality printers or photocopiers due to its high temperature resistance along with low friction and high resistance to wear. PEEK Rod is also found within the medical industry as surgical instrument handles or parts due to its compatibility with modern autoclave procedures. PEEK Rod is also found within the food processing industry because of its FDA approval, high resistance to microwaves and its heat resistance. PEEK Rod is also extensively used within the aerospace industry due to its lightweight, toughness and V-0 fire rating.

PEEK Sheet
PEEK Sheet is often manufactured in 500mm widths and extruded at 3000mm long, although smaller sizes are supplied via our online shop. PEEK Sheet is generally produced in thicknesses ranging from 5mm thick up to a maximum of 100mm thick and has a generous and useful range of sizes in between. PEEK Sheet is often described as being beige or putty in colour and is made up of two repeating monomers of ether and a Ketone monomer and is a high parity semicrystaline themoplastic. PEEK Sheet is often found within high end valves and pumps due to its heat resistance and wear resistance. PEEK Sheet is also used for medical implants because of its toughness, lightweight and ease of shipping. PEEK Sheet can also be found within the oil and gas industry because of its fire retardancy. PEEK Sheet also has a very high tensile strength, which is much greater than almost any other engineering plastic.